CN
Have you ever chosen a stainless steel filter cloth? What are the uses of stainless steel filter cloth? There may be a lot of friends do not know, stainless steel filter cloth refers to a high number of stainless steel wire mesh products, because the mesh is smaller look like cloth, hence the name. Today we filter industry experienced people mainly on the selection of stainless steel filter cloth principles, hope that through our introduction, we can give you some help. The first point is mainly filter efficiency, resistance, penetration, dust capacity, filter air speed and handling air volume. Under the circumstances, should be as far as possible to choose high-efficiency, low resistance, large dust capacity, moderate filtering air speed, large handling air, easy to manufacture and install, low-cost filter. This is in stainless steel filter cloth selection of a comprehensive consideration of one-time investment and two-time investment and energy efficiency ratio of economic analysis needs. According to the cleaning standard required in the room, the efficiency of the last grade stainless steel filter cloth is determined, and the combination grade and the efficiency of each grade of stainless steel filter cloth are reasonably selected. If the general indoor requirements for purification, you can use primary filter; if the indoor requirements for medium purification, you should use primary and secondary filter; if the indoor requirements for ultra-purification, three stages of primary, medium and high efficiency filter should be adopted, and the efficiency of each stage should be matched reasonably and properly, if the efficiency of the two adjacent stages is too different, the former stage of the filter will not play a role in the protection of the latter stage of the filter.
The second point is to correctly determine the dust content and dust characteristics of outdoor air. Because the filter is the outdoor air filtration purification into the indoor, so outdoor air dust content is a very important data. Especially in the multi-stage purification and filtration process, the selection of pre-filter should be based on the use of environment, spare parts costs, operating energy consumption, maintenance and supply factors. The determination of the third material is mainly to analyze the nature of dust-bearing gas. With the selection of stainless steel filter cloth related to the nature of the dust gas is mainly, temperature, humidity, acid and alkali containing organic solvents and the amount. Because some filters are allowed to be used at high temperatures, while some filters can only work at room temperature and humidity, furthermore, the quantity of acid-base and organic solvent in dust-bearing gas has an effect on the performance and efficiency of stainless steel filter cloth. The above is what we are stainless steel filter cloth and what are the use of the introduction, I hope that through our introduction, I hope you can reasonably choose stainless steel filter cloth products. Articles from stainless steel http://www.huanawl.com/ are not allowed to be reproduced without permission.