CN
stainless steel filter products in power plants, steel plants play an irreplaceable role in the filtration system, then what is the main role of stainless steel filter in power plants? Let's take a look at it together. The oil-gas separation system consists of oil-gas separation cylinder, oil-gas separation filter element, oil return pipe and oil return filter, safety valve and minimum pressure valve. The oil separation cylinder is divided by an intermediate separator, the primary separation is below the separator, and the secondary separation is above the separator. The primary separation adopts centrifugal type, the oil-gas mixture discharged by the host machine enters the separation cylinder through a check valve, and the oil-gas mixture produces rotation through a guiding device, under the action of centrifugal force, the cooling oil is separated and left in the oil pool in the cylinder. The separated Compressed air are then re-separated into secondary separators, which are used for coagulation filtration. The separation core consists of two closely packed concentric rings. The separation core is mounted on the cylinder exit cover with flanges. A Compressed air containing a small amount of cooling oil enters the separation core, and the oil mist coalesces and condenses into small oil droplets which, under the action of their own gravity, converge at the bottom of the separation core and pass through a filter screen and a throttle hole joint installed on the return oil pipeline, back to the Air compressor main engine intake. In order to make the oil-gas mixture really achieve the effect in the primary separation process of the separator, the liquid level and working pressure of the separator must be controlled, and the liquid level should be controlled below the middle part of the hydraulic mirror, working pressure must be above 0.55 MPA.
The air system consists of stainless steel filter, muffler throttle valve, intake valve, water separator and minimum pressure valve, after-cooler, condensate separation and discharge valve. Air in the atmosphere is filtered and then throttled and silenced before entering the Air compressor through the Air compressor intake valve for compression, and the compressed Compressed air is separated in the oil-gas separator, through the minimum pressure valve outlet; through the cooler cooling to the appropriate temperature, and then into the condensate separator after the separation of water discharge. At the same time, stainless steel filter in the hydraulic system and other filtering equipment among the universal application, our company can be customized according to your requirements for processing.