What are the common features of the stainless steel filter screen in the filtration equipment?

The so-called filtration equipment stainless steel filter screen is one of the equipment which is used very much in the industrial production at present. Its characteristic is that it can effectively purify the medium in the high-pressure environment, and what we want to introduce for you today is the filtration equipment stainless steel filter screen stainless steel filter screen common several big characteristics. The first point: the so-called harmful substances refers to the filtration equipment stainless steel filter screen oil, metal, carbon, with the rust and other substances in the pipe, if these substances are mixed into the stainless steel filters of the filtration equipment, it is very likely to cause system paralysis, thus affecting the entire process of industrial production, it can be seen that the use of stainless steel filter stainless steel filter screen filter equipment stainless steel filter screen purification is very important. Because the dew point of a stainless steel filter is the number of temperatures at which the actual amount of water vapor in the filter is equal to the ability to hold water vapor, so this temperature is the dew point of the air. Relative humidity refers to the ratio of actual moisture content in the air to the ability of the air to hold water, so the relative temperature is expressed as a percentage value.

The second point: because it is often used as a source of energy and power, because the stainless steel filter filter equipment has the characteristics of safety, flexibility, easy access, but in order to reduce the cost of operation, it is necessary to purify the stainless steel filter net of the filtration equipment by removing the harmful substances such as water, water vapor, oil mist and waste gas, improve the efficient use of this energy. Third Point: the correct installation is in order to better use, so be sure to follow the product identification of the correct way to connect the air intake, air outlet; the lower the temperature in the pipe installation is appropriate, if the air inlet temperature of the installation location is higher than 60 ° C, it is recommended to install a rear cooler in front of the equipment, the equipment installed in the air compressor station main pipeline, should be at least 10 meters away from the air compressor outlet; If it is to solve the branch pipeline and terminal equipment oil and water problems, the installation should be as close as possible to the terminal equipment. The above is the filter equipment inside the stainless steel filter what common characteristics, today for everyone to bring the explanation first here, more content please continue to pay attention to us http://www.huanawl. com/.