CN
Stainless steel filter is widely used, mainly for chemical process separation and refining, wastewater purification treatment and recovery of useful components, industrial wastewater zero discharge, activated sludge membrane wastewater treatment reuse. It is mainly used in drinking water treatment abroad, while it is mainly used in industrial wastewater treatment and reuse in China. As a pre-treatment of reverse osmosis, it has been widely recognized. For example, the double membrane technology of microfiltration/reverse osmosis combination has been widely used in domestic industrial water treatment, especially in electric power, chemical industry, automobile and other industries. Anping WARNER SCREEN PRODUCTS CO., Ltd. always adhere to the "quality from the real touch, professional ability to go further" business philosophy, export quality, worthy of your trust! Stainless steel filter has very good filtering performance, 2-200 micron filter size can play a uniform surface filtering performance, the main filter material adopts multi-layer stainless steel sintered mesh, filtering accuracy of 0.5-200 micron, its size can be processed according to user requirements. Such a filter element has many characteristics: [1] good filtration performance, 2-200um filter size can play a uniform surface filtration performance. [2] Stainless steel filter with uniform pores and precise filtration accuracy. [3] Good corrosion resistance, heat resistance, pressure resistance and wear resistance. [4] The stainless steel filter has a large flow per unit area.
Stainless steel note: the use of stainless steel filter industry is among the most widely used a non-standard product, its specifications can be processed according to the requirement, has taken many forms, a 200 micron filtration precision can be from 1 micron can be between processing customized, today let's attention to the use of stainless steel filter as an introduction. In the use of stainless steel filter above we can according to the raw materials used, a contrast work, with the extension of the use of time, the impurities in the water will block the filter element, activated carbon filter element will adsorption saturation. Therefore, generally speaking, the PP filter element needs to be replaced in 3 months, and the activated carbon filter element needs to be replaced in 6 months. The hollow fiber because it can not be cleaned, is generally placed in the back end of PP cotton and activated carbon, otherwise it is easy to plug, used as the end of water purification equipment sterilization needs to be replaced for 1-2 years.