CN
On the installation of stainless steel filter steps detailed stainless steel filter as one of our commonly used equipment, the performance of stainless steel filter and other knowledge are needed for us to understand, so today we will introduce you the installation steps of the device, after mastering these can help you better use. First, equipment for horizontal, vertical installation is possible, installation should pay attention to the shell marked on the direction of the arrow should be consistent with the direction of the flow. Second, pay attention to through the water quality test can know the size of impurities, physical characteristics, concentration and other indicators, these indicators will determine the selection of filters and maintenance methods. Third, the equipment before the installation of the first determine the diameter of the filter runner to determine its filtering capacity. Fourth, for each section of self-cleaning filter cost comparison, select the appropriate filter system.
In addition, in the stainless steel filter operation process, there is a need to pay attention to the problem: if the filtered sewage sand content of more than 200 mg/L or water containing iron oxide, it is necessary to build special sand tank for water quality treatment, and the design of sand tank should follow the following principles: first, micro-irrigation system should try to extract the surface water of sand tank. Second, under the premise that the equipment can meet the sediment velocity and sediment area, a narrow and long-shaped sediment basin should be built, because the sediment-settling effect of this shape is better. 3. The water intakes of the equipment micro-irrigation system should be as far away from the water intakes of the sand basin as possible. 4. After the end of the irrigation season, the sediment tank shall ensure the discharge of the deposited sediment. 5. The water discharged from the backwash of the self-cleaning filter should be returned to the sediment tank, but its backwater outlet should be as far away from the water intake of the micro-irrigation system as possible. The above is the installation steps we introduced for you about the stainless steel filter, these are our actual use of more practical knowledge, can help equipment play a better effect, so we must master! The article comes from stainless steel filter manufacturers http://www.huanawl. com/, without permission is strictly prohibited.