CN
Stainless steel filter is one of the most commonly used equipment in industrial production. Its characteristics are that it can be an effective purification medium in a high-pressure environment. Today, we will introduce several common characteristics of stainless steel filter for you.
The first point: The so-called harmful substances refer to the oil, metal sheet, carbon, rust and other substances in the stainless steel filter of the filter equipment. If the stainless steel filter of the filter equipment is mixed with these substances, it is likely to cause the system to break down, thus affecting the whole process of industrial production. It is very important to use the stainless steel filter of the filter equipment to purify the stainless steel filter of the filter equipment. Because the dew point of the stainless steel filter of the filter equipment is a temperature quantity, at this temperature, the actual amount of water vapor in the stainless steel filter of the filter equipment is equal to the ability to maintain water vapor, so this temperature is the dew point of the air. Relative humidity is the ratio of the actual water content in the air to the air's ability to retain water, so relative temperature is expressed as a percentage.
The second point: Because often used as a kind of energy and power, because the stainless steel mesh filter equipment has the characteristics of safety, flexible, easy to get, but in order to reduce running cost, improve work efficiency, it is necessary to purification, stainless steel mesh filter equipment is mainly through the elimination of the water, steam, oil mist, exhaust gas and other harmful substances, Improve the efficient use of this energy.
Third point: correct installation is for better use, so be sure to connect the air inlet and outlet according to the correct method marked on the product; It is appropriate to install in the position where the pipe temperature is lower. If the inlet temperature at the installation position is higher than 60°C, it is recommended to install a rear cooler in front of the equipment. When the equipment is installed in the main pipe of the air compressor station, it should be at least 10 meters away from the air compressor outlet; If it is to solve the oil and water problems of branch pipes and terminal equipment, the installation should be as close as possible to the terminal equipment.
The above is the stainless steel filter screen inside the filter equipment, what are the common characteristics of the stainless steel filter, today for you to bring the explanation of the first here, more content please continue to pay attention to us http://www.huanawl.com/.