CN
Modern society with the rapid development of industry, our living environment is becoming worse and worse, many consumers will buy stainless steel filter to safeguard their own breathing air and the clean degree of drinking water, but the stainless steel filter not only used in our life, have been applied in many enterprises also, Mechanical stainless steel filter is one of them.
Mechanical stainless steel filter is also known as pressure stainless steel filter. It is an important part of pretreatment and water purification system in the early preparation of pure water. Have steel rubber lining or stainless steel material, depending on the filter medium is divided into natural quartz sand filter, stainless steel medium stainless steel filter, activated carbon filter, manganese sand filter, such as stainless steel stainless steel stainless steel filter, according to the way the water can be divided into single flow dual-flow stainless steel filter, according to the actual situation can be used in combination can also be used alone. Mechanical stainless steel filter is the use of one or more filtration medium, under certain pressure, the stock solution through the medium, the impurity removal, so as to achieve the effect of filtration. The use of stainless steel filter filled with refined quartz sand filter material, when the water flows from top to bottom through the filter layer, suspended matter and viscose particles in the water are removed, so as to reduce the turbidity of water. Mechanical stainless steel filter is mainly suitable for water filtration, mainly used for the treatment of water turbid reverse osmosis, and ion exchange softening desalting system before pretreatment, can also be used for surface water, groundwater sediment removal. The turbidity of the inlet water should be less than 20 degrees, and the turbidity of the outlet water can be less than 3 degrees. Can be used in our life, such as: paper, textile, food and beverage, drinking water, petrochemical and so on. Mechanical stainless steel filter size according to the water, the material has A3 carbon steel, 304 stainless steel or 316 stainless steel and glass glue, but also according to the water quality and water quality requirements, can choose a single filter, double filter or multi-layer filter material. Mechanical stainless steel filter can be divided into quartz sand stainless steel filter, activated carbon stainless steel filter, multi-medium stainless steel filter, iron manganese stainless steel filter, fiber ball stainless steel filter, hair stainless steel filter. Single flow mechanical stainless steel filter pipeline is relatively simple, the operation is very stable, and the double pipe type mechanical stainless steel filter is provided with water inlet device at both ends, the amount of filtration is relatively large, the ability of decontamination is relatively high, but the pipeline is complex, transport is not very stable. Above for the mechanical stainless steel filter for you to make a simple introduction, I believe that through the above content we have a certain understanding of the mechanical stainless steel filter. This article is from stainless steel filter company http://www.huanawl.com/.