CN
In advance to help promote clean strainer screen mesh of floor heating room temperature, in the cold winter, it not only ensures the indoor temperature, but also saves space, because the floor heating system is located in the ground, so the user can't see at ordinary times, scratching, poor understanding of the nature of floor heating, heating when be or get out of danger the also don't know how to solve the problem. For this reason, the following is to introduce the use of filter mesh to pay attention to maintenance. Floor heating water temperature is lower than the radiator yesterday, Miss Li said, his floor heating water supply temperature is low, although the room temperature is standard, but still worry about cooling problems. As we all know, the life of floor heating pipe is actually the life of floor heating pipe, once the life of the heating pipe is over, then the life of the floor heating system is over. The higher temperature of water is easy to cause damage to the floor heating pipe, affecting the service life of the floor heating. At the same time, because the radiation surface of the floor heating is large, the relative requirement of the water supply temperature is low, only 40℃ ~ 50℃, can achieve the heating effect of 18℃, is a kind of efficient energy saving heating system. The radiator storage water is small, the radiation area is small, to reach the temperature of 18℃, you need a higher water supply temperature. In order to ensure the heating effect, heating units generally control the outlet water temperature at 60℃ ~ 70℃. When encountering extreme weather, they will also adjust the water temperature.
The use of floor heating should pay attention to the maintenance of the public Mr. Zhang has been using floor heating for three years, from the beginning of winter, he found his own floor heating is not hot, but other residents in the community have no this problem. Then after inspection, it was found that the floor heating is not cleaned for a long time, resulting in the blockage of the filter screen. After cleaning the filter mesh, the heating returned to normal. Therefore, if you want to use floor heating better, you need to ensure that the filter screen is clean. In addition, the ground heating is not hot sometimes and the pipeline gas. The ground heating supply pipe is hot, the return pipe is not hot, because there is gas in the pipe, which leads to the hot water can not enter the loop and can not be circulated. The bleed valve opens the air in the pipe and drains it until hot water is released. Sometimes, the floor heating is not hot may also be the owner of some simple operation problems, such as the valve is not completely open, or the inlet valve is open large and the outlet valve is open small. The choice of the floor in the article shop and the effect of the floor heating also have a certain impact. It is understood that when the house is decorated with floor heating, marble, floor tile and floor should be used together as far as possible, and the solid wood floor should not be used as far as possible. Attention should be paid to the floor with good thermal stability and low water content, which is not easy to deformation after heat; Floor appropriate is thin SHOULD not be thick, appropriate is narrow should not be wide, in order to achieve the requirement that fight deformation and heat conduction. Winter is getting colder and colder, so many families are using the floor heating, but the problem that the floor heating is not hot often occurs, in fact, there are many reasons for this factor, and the filter screen blockage is one of them, so the user in the use of floor heating, need to clean the filter screen in time. The article is from the filter http://www.huanawl.com/, without permission is prohibited to reprint.