CN
The stainless steel filter basket basket filter is to remove a small amount of solid particles in the liquid of small equipment, can the normal work of the protection device, when the fluid is placed into a certain size of filter cartridge, the impurity is blocked, and clean the filtrate by filter outlet, when need to wash, just remove the removable cartridge, after processing to reload the can, therefore, It is very convenient to use and maintain.
Basket filter material: the material of the filter is generally the same as the material of the connected process pipe. For different service conditions, cast iron, carbon steel, low alloy steel or stainless steel filter can be considered.
1, shell material: carbon steel, stainless steel 2, nominal diameter: DN25 - DN400mm 3, filter material: stainless steel 4, sealing material: butadiene rubber, polytetrafluoroethylene, oil resistant asbestos glue (selected according to the working medium) 5, working temperature: ≤90℃ 6, jointing mode: Flange 7, nominal pressure: 1.6mpa 8, filtration accuracy: 10-480 mesh (general water network is 18-30 mesh, ventilation network is 40-100 mesh, oil network is 100-480 mesh) 9, suitable for materials: ① chemical, petrochemical production of weak corrosive materials, such as: water, ammonia, oil, hydrocarbons, etc.; ② Chemical production of corrosive materials, such as caustic soda, soda, carbonic acid, acetic acid, ester acid, etc.; (3) Cryogenic materials in refrigeration, such as liquid methane, liquid ammonia, liquid oxygen and various refrigerants; (4) Light industry food, pharmaceutical production of hygiene requirements of the material, such as: beer, beverage, dairy products, grain pulp1, the core part of the filter is the filter core, filter core is composed of filter frame and stainless steel wire mesh, stainless steel wire mesh is vulnerable parts, need special protection; 2 when the filter works for a period of time, the filter core precipitates certain impurities, then the pressure drop increases, the flow rate will decrease, it is necessary to remove the impurities in the filter core in time; 3, cleaning impurities, pay special attention to the filter element on the stainless steel wire mesh can not be deformed or damaged, otherwise, then installed on the filter, filter medium purity can not meet the design requirements, compressor, pump, instrument and other equipment will be damaged; 4, if the stainless steel wire mesh is found to be deformed or damaged, it needs to be replaced immediately.