CN
For what is stainless steel filter with activated carbon, for the easy to understand explanation is that activated carbon filter is one of the more commonly used water treatment equipment, as a water treatment desalting system, treatment can adsorb before filtration can not remove the residual chlorine of a simple equipment. The advantages of stainless steel filter element and activated carbon, especially to prevent the application of post-stage reverse osmosis membrane technology, have a good adsorption of ion exchange resin and other free residual oxygen heavy pollution. Its technology research and development adopts the long diameter design of the activated carbon adsorption filter cylinder, and uses the efficient activated carbon with a specific surface area greater than 1000M2/g as the adsorption foundation, so that it has both the upper special filtration and the lower efficient adsorption and other functions.
First of all, the correct stainless steel filter and activated carbon cleaning method can effectively ensure the service life of post-stage equipment, and can improve the water quality to prevent pollution. At the same time, it also absorbs small molecular organic matter and other polluting substances leaked from the previous stage, and has obvious adsorption effect on peculiar smell and colloid and pigment in the water. The adsorption capacity of activated carbon filter is proportional to the time of contact with water, that is to say, the longer the contact time, the better the water quality after filtration. But it is worth noting that the filtered water should flow out of the filter layer slowly rather than quickly. The new activated carbon should be cleaned before priority use, otherwise it will cause the phenomenon of black ink flow out, bringing trouble to life.
The adsorption principle of stainless steel filter element and activated carbon is to form a layer of balanced surface concentration on the surface of its particles, so as to achieve the adsorption function. The size of activated carbon particles also affects the adsorption capacity. The smaller the activated carbon particles, the larger the filtration area. This is also why the total area of powdered activated carbon is large and the adsorption effect is better. Anping Warner wire mesh products Co., Ltd. always adhere to the "quality from real touch, professional can go further" business philosophy, export quality, worthy of your trust! After reminding the majority of users of activated carbon filter friends, activated carbon filter before loading, to carry out a careful check, the bottom filter material quartz sand should be the stability test of the solution, soak a day before use. Activated carbon filter quartz sand washed clean into the equipment should be carefully cleaned, water should be washed from the top down, dirty water discharged from the bottom, until the water clarified, so as to complete the cleaning of activated carbon filter.
Finally the working principle of stainless steel filter with activated carbon is in the form a layer of the surface of the balance on the surface of activated carbon particles concentration, then the impurity adsorption in the activated carbon particles of organic matter, often activated carbon filter at the beginning of the use of the adsorption effect is very high, with a long time, the adsorption ability of active carbon would be reduced in different degrees lower, adsorption effect also drops. So it is necessary to replace the activated carbon regularly.