Water purification project can not do without stainless steel filter

In many process need to use stainless steel filter, such as: we are very familiar with electrodialysis engineering, electrodialysis engineering, water purification must go through a process is the need to remove suspended solids through stainless steel filter, granular and other impurities. There are many like brackish water desalination, space water production, drinking water purification, groundwater fluoride, and pharmaceutical industry injection preparation, chemical fertilizer, machinery industry water and other processes need to use stainless steel filter.

Stainless steel filter used as industrial water purification is mainly due to the following automatic adjustment of filter layer density: filter layer height automatic zone distribution process, without additional mechanical power. It can adapt to a wide range of raw water quality: the turbidity of influent water ranges from 15FTU-200FTU, and the turbidity of filtered effluent water is only 3Ftu, which can greatly expand the application range of contact filtration. Anping Warner wire mesh products Co., Ltd. always adhere to the "quality from real touch, professional can go further" business philosophy, export quality, worthy of your trust! Primary water qualified: in general, there is no need to discharge primary water. High filtration accuracy: the removal rate of suspended solids with particle size greater than 5μm can reach 90~95% degree, and the turbidity of effluent water is much lower than that of sand filter, and it can be adjusted. Low water consumption: only 0.5~1% of water production. Floating plate no jamming: the original guiding device can ensure that the floating plate will not appear deflection jamming phenomenon. The backwashing water requirements are not high: in general, raw water can be used for backwashing. Good backwashing effect: large stretch space of filter layer, good backwashing effect, large intercepting capacity: more than 20Kg/m3, more than 4 times that of sand filter. High filtration speed: the filtration speed is generally up to 20~60m/h, which is 3 times of the sand filter, so the floor area is much smaller than the sand filter.