CN
What is the stainless steel filter element? Stainless steel filter core is the heart of the filter, as the name implies. The main filter element is also the main principle of the filter, is to purify the original ecological resources and the reuse of resources, and the need for purification equipment, filter element is generally mainly used in oil filtration, water filtration, air filtration and other filtration industries. Remove a small amount of impurities in the filter medium, can protect the normal operation of the equipment or clean air, when the fluid passes through the filter element with a certain accuracy, its impurities are blocked, and clean flow out of the filter element. So the pros and cons of the stainless steel filter element? Identify the quality of stainless steel filter element, you can first analyze the aperture of the filter element, inferior filter hole is relatively large, and the uniformity is not good, which is very detrimental to the effect of filtering, and even causes the engine to wear in advance. The quality of the filter element made of low quality adhesive is usually affected, not resistant to oil, and it is not firm to use. Only carefully choose the regular brand of high quality stainless steel filter is a wise choice, as said before, you can observe the filter hole, and then carefully analyze the filter material. In this way, we can finally choose a high-quality stainless steel filter element.
The characteristics of stainless steel filter element stainless steel filter element material is generally 304,304L, 316,316L with more. Raw materials are mostly; Punching mesh, steel mesh, sintering mesh, stainless steel mesh and other materials are ideal. Structure: flange type, common thread interface type. Before purchasing, you are advised to consult HNST Warner Worldcom manufacturers and provide purpose instructions to recommend appropriate stainless steel filter elements for you. Stainless steel filter element when used to pay attention to the use of stainless steel filter element, must often check the sealing situation, to ensure good sealing performance. It is necessary to carefully check the filter cloth of stainless steel filter element to ensure that it has no folding, no damage, no residue, and make it smooth and intact to ensure the filtering effect of stainless steel filter element. At the same time, the filter net should be washed frequently to ensure the filtering performance of the filter cloth at all times. Why to maintain the stainless steel filter core stainless steel filter core is part of the filter, filter is composed of filter frame and stainless steel wire mesh, stainless steel wire mesh is suitable for damage parts, need special protection. When the stainless steel filter works for a period of time, the filter core precipitates certain impurities, then the pressure drop increases, the flow rate will decrease, need to remove the impurities in the stainless steel filter in time. Stainless steel filter element in the removal of impurities, pay special attention to the filter element part, shall not be deformed or damaged, otherwise, then installed on the stainless steel filter, filter medium purity will not meet the design requirements. The performance advantages of stainless steel filter element has a variety of different porosity (28% - 50%), aperture (4U - 160U) and filtration accuracy (0.2um - 100um), the channels criss-cross, high temperature resistance, resistance to cold and heat. Corrosion resistance. Suitable for a variety of acid, alkali and other corrosive media, stainless steel filter element can resist general acid and alkali and organic corrosion, especially suitable for sulfur gas filtration. High strength, good toughness. Suitable for high pressure environments. Weldable, easy to load and unload. Stable hole shape, uniform distribution, ensure stable filtration performance. Good regeneration performance. After repeated cleaning and regeneration, filtration performance can recover more than 90%.