How should the dust filter cylinder be repaired and maintained?

     The filter cartridge is now widely used in food, cement, chemical, metal processing, special powder and other industrial fields. Filter canister dust catcher after a long time is very easy to break, so the filter canister dust catcher maintenance and maintenance is particularly important, how to maintain? We need to do the following: (1) according to the dust removal system of dust absorption to determine the amount of dust removal equipment, dust removal cycle. (2) the drainage cycle is determined according to the water accumulation in the air bag of the air water separator in the Compressed air system. (3) often check whether the dust collector pulse cleaning system is normal blowing, if not normal, focus on checking the pulse valve diaphragm, solenoid valve failure or damage, and should be timely maintenance or replacement. (4) check whether the equipment is running normally according to the fluctuation of the resistance of the equipment. (5) check the ge of the wearing parts regularly according to the list of wearing parts and replace them in time. (6) add lubricating oil to the lubricated parts of the equipment on a regular basis. CYCLOIDAL pinwheel reducer every six months to replace the gearbox 2 # sodium-based Grease, bearing lubrication point once a week to add 2 # lithium grease. (7) check the differential pressure conveyor regularly to see if there is any clogging, and clean it up in time. The above is the dust filter in the overhaul and maintenance of some matters needing attention, I hope that everyone through the above introduction have a more detailed understanding.