Stainless Steel sintered screen filter core is a kind of widely used filter core type, usually using stainless steel wire for stacking, and by vacuum sintering. The stainless steel sintered screen filter core has good corrosiveness, strong permeability and high strength, high filtering precision, and the screen is not easy to fall off. In the stainless steel sintered screen filter core, if there is a blockage, we can use the following methods to clean: 1, heating evaporation method: some of the filter on the existence of some deposits, if the method of heating can be removed. However, it should be noted that heating can not make the SINTER screen filter core residual carbon ash and solid attachment. 2. ULTRASONIC CLEANING: When the SONICATION is in the cleaning solution, the dirt in the sintered screen filter core can be removed. As the sintered screen filter core is a porous material, it has the property of absorbing ultrasonic wave, which can affect the cleaning process. 3, BRUSH CLEANING: This is the most commonly used method of cleaning sintered screen filter elements, in the use of the process, it is recommended to clean with a soft brush, with a hard brush easy to cause the damage of sintered screen filter elements, which affects the overall performance. If used in conjunction with a cleaning solution, the effect will be better. I believe that through the above introduction you have a more understanding of the stainless steel sintered screen filter cleaning methods, I hope that through the introduction you can better use the product.
CN